Main Stud Kit

Name: Main Stud Kit – 2009–2024 5.0L V8 AJ133 Jaguar Land Rover | 2013–2020 3.0L V6 AJ126 Supercharged
Brand: Xotic Performance
SKU: MP886
Price: 343.0 GBP
Availability: OutOfStock

Jaguar Land Rover · AJ133 5.0L V8 / AJ126 3.0L V6

2009–2024 AJ133; 2013–2020 AJ126 Supercharged

PART # MP886

Sold out

£343.00 - £343.00

£343.00

£343.00 - £343.00

£343.00

Availability:

Disclaimer:

Designed to secure crankshaft main bearing caps. This is NOT a head stud kit.

Why Main Studs?

Main studs provide superior clamping force compared to main bolts, reducing wear on block threads and assisting with main cap alignment. Unlike bolts, which twist during tightening, studs remain stationary, reducing the chance of main cap walking under high loads. They are especially beneficial in high-performance applications where increased stability and durability are required.

Your application

The right fit comes first.

Browse the compatible applications below, or check your exact vehicle before adding this product to your cart.

Check my vehicle

Main Stud Kit – 2009–2024 5.0L V8 AJ133 Jaguar Land Rover | 2013–2020 3.0L V6 AJ126 Supercharged

Inside the box

Know exactly what arrives.

Included components for this product.

Included components for Main Stud Kit – 2009–2024 5.0L V8 AJ133 Jaguar Land Rover | 2013–2020 3.0L V6 AJ126 Supercharged
Qty	Component
20	Main studs
10	Outer bolts
20	Hardened parallel washers
20	Nuts
1	Assembly lubricant

XOTIC 7200 / Material comparison

Tensile & yield strength.

Two measures of strength. Explore the comparison for XOTIC 7200 alloy and 8740 chromoly steel.

Tensile strength

The maximum tensile stress a material withstands before failure.

XOTIC 7200 series

232K PSI

8740 chromoly steel

222K PSI

Yield strength

The stress at which a material begins to deform permanently.

XOTIC 7200 series

212K PSI

8740 chromoly steel

201K PSI

The original comparison identifies an M14 × 237 specimen.

Original method note: ISO 6892-1:2016 or ASTM A370 / ASTM E8/E8M in the US.

Material specification

220–240K PSI

Strength specification

The published tensile-strength range for XOTIC 7200 main studs is 220,000–240,000 psi. Tensile strength describes the material under tension; it is not an installed clamping-force or horsepower rating.

View the test documentation

The linked ATRONA report records a 240,000 psi tensile result for a submitted stud tested in May 2020. This result applies to the submitted sample.

View source report

See the details

Behind the product.

Watch the video selected for this product.

XOTIC videoWatch on YouTube

Before you begin

A good install starts here.

Review the instructions and any application-specific requirements before you begin.

Read installation guide

Before you order

Will this fit my vehicle?

Confirm the AJ133 5.0L V8 or AJ126 3.0L V6 engine configuration. Use the vehicle checker above to confirm your exact application. For an engine swap or an unusual setup, contact XOTIC before ordering.

Is assembly lubricant included?

Yes. Assembly lubricant is included in this kit. Apply it only where the installation procedure specifies.

How does the warranty work?

Review the warranty policy for coverage, eligibility, and claim requirements.

Read warranty termsRegister your warranty

California Proposition 65 warning

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

From our customers

Reviews from real customers.

Customer feedback on this product, powered by Judge.me.

1,637reviews across XOTIC

4.83 / 5

Overall Judge.me rating

The wider XOTIC community

More builds. More perspectives.

Explore feedback from customers across the XOTIC range.

Explore all reviews

Your build. Our support.

Talk through fitment or installation planning with the XOTIC team.

Ask XOTIC Find an Installer or Dealer