Chevrolet LS Cam & Retainer Plate Bolt Kit Installation Guide — CB100

This guide covers installation of the XOTIC PERFORMANCE™ CB100 Chevrolet LS Cam & Retainer Plate Bolt Kit. Prefer a printable copy? Download the PDF manual.

How to install the CB100 cam & retainer plate bolt kit

1. Inspect the components. Before installing any components, check for product damage and report any issues to us.
2. Lubricate under the bolt heads. Use the provided assembly lubricant under the head of each bolt. This reduces friction and allows for accurate torque readings.
3. Hand-tighten, then torque in a cross pattern. Install the provided bolts onto the retainer plate and tighten them by hand. Torque the bolts to 25 ft-lbs using a cross pattern for even distribution of pressure.

CB100 retainer plate bolt torque specification

Tightening sequence

With the retainer plate oriented as shown above, follow this order: 1. Top → 2. Bottom → 3. Right → 4. Left.

View the numbered retainer plate diagram in the PDF manual.

Need help?

For technical support, email support@xotic-performance.com.

Working on an exciting new project? Show off your craft on Instagram and tag #XOTICPERFORMANCE for a chance to be featured.

Source: CB100 instruction manual. Doc ref: 2026.01.30.